Product Overview

Introduction

A smart roller shutter wall switch that supports a maximum current of 1A for the motor as a load. It not only supports WiFi remote control but is also compatible with the Matter platform, enabling seamless integration with various smart home systems. Simply connect the device to the switch and motor correctly to easily upgrade regular electric curtains into a smart system.

Product Name

SONOFF Matter Over WiFi

Smart Roller Shutter Wall Switch

Product Model

MINI-RBS-E

Highlights

Matter Compatibility: This curtain retrofit device ensures compatibility with multiple platforms and their devices, breaking down the ecological barriers with third-party platforms.

Notice:

The product supports Matter platforms like Apple Home, Google Home, Alexa, Home Assistant, and Samsung SmartThings. Percentage control is available on Apple Home, Google Home, and Alexa, while other platforms only support basic curtain functions (open, close, pause).

Precise Percentage Adjustment: Control indoor lighting according to your needs, enhancing comfort and energy efficiency while adapting flexibly to different scenarios.

Scheduled Curtain Operation: Set specific times for curtain opening and closing based on your routines, enhancing convenience in daily life.
Direction Reverse: When the motor wiring is reversed, there is no need to rewire. Simply activate this feature to reverse the rotation direction and ensure the equipment operates normally.

Specification

Product name	Orb-RBS
Product series	Fusion series
Product type	Matter over WiFi smart roller shutter wall switch
Model	MINI-RBS-E
MCU	ESP32
Rating	100-240V~ 50/60Hz 1A Max
Wi-Fi	IEEE 802.11b/g/n 2.4GHz
Net weight	84.7g
Product dimension	86x86x34mm
Color	White
Casing material	PC
Diameter of wiring(recommend)	18AWG to 14AWG SOL/STR copper conductor only
Applicable place	Indoor
Working temperature	10T40 (-10℃~40℃)
Working humidity	5-95%RH, non-condensing
Certification	CE/RoHS

Key Features

eWeLink Platform

Notice:

The functionality here specifically refers to the capabilities available after pairing the device with the eWeLink APP. If the device is paired with Alexa, Google Home, or any other Matter platform, please refer to the [Matter Platform] section for details.

Device Home Page Functions
Key Features	Feature Description
Open/Close Device	To control the curtain with open/close/pause
Preset Status Mode	Shortcut of the custom preset curtain status 3 preset modes
Smart Timer	Scheduled On/Off. Countdown Timer. Recurring on-off loops.

Device Settings
Key Features		Feature Description
Assign Location		Set up the home and room where the device is located.
Share Device		The device can be shared with other eweLink accounts.
Smart Scene		Trigger condition: open/close/power value/daily power consumption / monthly power consumption. Execution action: open/close/reverse.
Third-party Platforms (Add the device to the eWeLink app via the SONOFF gateway, then sync it to the corresponding third-party platform through account linking.)	Alexa	app control(Percentage Control) & voice control(Open/Close)
	Google Home	app control(Percentage Control) & voice control(Open/Close)
	SmartThings	app control(Open/Pause/Close/Percentage Control) & voice control(Open/Close)
	Apple Home	app control(Percentage Control) & voice control(Open/Close)
	Home Assistant	app control(Open/Pause/Close/Percentage Control) & voice control(Open/Close)
	IFTTT	voice control(open/close)
	Alice	voice control(Open/Close)
	Salute	voice control(Open/Close)
Group Control		Create a group consisting of one or multiple devices of the same type to enable synchronous control for all devices within the group.
LAN Control		A control method where the app communicates directly with the device over the same router, without going through the cloud platform. On/Off
eWelink-Remote Control		If you have also purchased the SONOFF R5, you can add it as a "sub-device" to the Orb-RBS. By using the "Scene Function" in the eWeLink app, the two devices can be linked, allowing the Sonoff R5 to function as a convenient wireless remote controller.
Push Notifications		Push the device's on/off status and power consumption to the user.
Offline Alert		When this feature is enabled, the device will notify the user if it remains offline for more than 5 minutes.
Logs		Records of device status changes. (You can view the operation records of the past three months).
Extra Time		Prolonged use may cause hardware errors, leading to position control deviation. Adjusting the "Extra time" helps correct this and improves the accuracy of percentage control.
Move Direction		Quickly swap the forward and reverse line ports, and easily correct the direction of the curtain movement without disconnecting the wiring.
Curtain/Blind Type		Select a curtain icon based on the actual application scenario.
Switch Mode		Select a matching switch mode for your connected device.
Automatic Updates		When the latest firmware is available for upgrade, the device can be automatically upgraded within a custom time

Matter Platform

Platforms and Capabilities	Apple Home	Google Home	Alexa	SmartThings	Home Assistant
Travel Calibration	√	√	√	√	√
Percentage Control	√	√	√	√	√
Open/Close/Pause Button	×	×	×	√	√
	Learn more	Learn more	Learn more	learn more	Learn more

Installation and Configuration Guide

① Switch Button

Switch Button	Description
Short press	Open or close the curtains.

Notice: The pairing mode will time out after 10 minutes. To re-enter pairing mode, simply press and hold the button for 5 seconds.

② Device Button

Device Button	Description
Press and hold for 5 seconds	The device enters the pairing mode. (Pairing time 10 minutes)

③ LED indicator (Blue)

LED indicator (Blue)	Description
Flashes two short and one long	Device is in pairing mode.
Keeps on	Device is online.
Flashes once	Offline
Flashes twice	LAN

Wiring Diagrams

Installation Recommendations

Since the device needs to be connected to the motor, it is recommended to reserve a switch junction box near the existing electric roller shutter for installation.
Wall junction box requirements:

Motor Requirements

The user must have an electric roller shutter at home and will need to retrofit it to upgrade it to a smart roller shutter.
① The motor used for the electric roller shutter must have a current of less than 1A.
② Motor power supply: AC (100~240V).
③ The motor shall be a 4-wire or 5-wire AC motor (including neutral, forward, reverse, and ground wires) with a built-in forward/reverse rotation limiter.

To ensure the safety of your electrical installation, it's essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection(RCBO) with an electrical rating of 1A has been installed before the Orb-RBS.

WARNING

Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!

Wire Diagrams

Terminals		Wires
N	Neutral Line	N	Neutral Line
L	Live Line	L	Live Line（100~240V）
L out1	Live Output Terminal__1(100~240V)	Forward Line	Motor Forward Line
L out2	Live Output Terminal__2(100~240V)	Reverse Line	Motor Reverse Line

Installation Check

① Make sure all wires are connected correctly.

② Press the external switch to check if the roller shutter moves in the correct direction. If it does not, power off the device, swap the Lout1 and Lout2 wires, and test again.

Check the Device Status

Roller shutter direction test

After pressing the switch, check if the roller blind moves in the correct direction. If not, turn off the power, swap the Lout1 and Lout2 wires, then test again.

Important Prerequisite Confirmation:
Please select the appropriate section based on the ecosystem you are using (Matter or eWeLink). Follow the corresponding steps to complete the "Add Device" and "Travel Calibration" operations.

Matter Ecosystem User Guide

1. Add Device

Open a Matter-compatible App to scan the Matter QR code on the Quick Guide or the device itself to add the device.

Add to Apple via Matter

Add to Google via Matter

Add to Alexa via Matter

Add to SmartThings via Matter

Add to Home Assistant via Matter

2. Travel Calibration

⚠️Using percentage control requires travel calibration. Please select one of the following two calibration options based on your needs.

Method 1: Automatic calibration

① Press and hold the device button for more than 10 seconds until the LED indicator enters breathing mode. The device will then automatically control the motor for calibration.

Method 2: Manual calibration

① Press and hold the device button for more than 10 seconds until the LED indicator enters breathing mode. Then, briefly press the device button to enter "Manual Calibration" mode.

② Manually open the curtains completely, then briefly press the device button until the LED indicator flashes three times.

③ Wait for the device to automatically close the curtains, then briefly press the device button again until the LED indicator flashes three times. This completes the "Manual Calibration."

④ Control the device through the App and check the fully open or fully closed positions. If there is any discrepancy, you can recalibrate.

Fully open

Fully closed

eWeLink Ecosystem User Guide

1. Add Device

① Download the eWeLink App

Please download the "eWeLink" App from Google Play Store or Apple App Store.

② Scan QR code to add the device

Enter "Scan"

Scan the QR code on the quick guide or the device

Select "Add Device"

(If the device exits pairing mode)

Long press the button for 5 seconds

Check LED indicator flashing status

(Two short and one long)

Search for the device and start connecting

Select the "Wi-Fi" network and enter the password

Device "Added completely"

2. Travel Calibration

⚠️Using percentage control requires travel calibration. Please select one of the following two calibration options based on your needs.

Users can use the "Travel Calibration" pop-up window in the eWeLink App, or open the "Initial Settings" on the device settings page and then perform "Automatic Calibration" or "Manual Calibration" according to the text instructions in the App.

① Method 1: Automatic calibration

Click "Start Now"

Wait for the automatic calibration to complete

② Method 2: Manual calibration

Click "Start Now"

Click "Manual"

Select "Next" to mark the "fully open" position

Select "Done" to mark the "fully close" position

FAQ

1. What type of junction box is the Orb-RBS compatible with?

2. Can the motor run continuously in the same direction?No. The motor should not operate in a single direction for more than 2 minutes. To prevent overheating and damage, the device will automatically enter a stop state after exceeding this time limit.

3. Can two or more curtain motors be connected in parallel and controlled synchronously through the Orb-RBS?

No. Due to individual differences in each motor, even if the operating time is the same, the travel distance may not be consistent, making synchronous control impossible.

4. Why does the app show the device as offline after clicking "Enable Pairing Mode"?

After enabling Pairing Mode in the eWeLink app, the device enters Network Pairing Mode (indicated by a "two short, one long" LED pattern) and shows as "Offline." Short-press the device button to restore "Online" status.

5. Why can't the MINI-RBS perform "automatic calibration" for the curtain motor?
If the motor power is too small, or the curtain type is not a roller blind, roller shutter, or projection screen, it may cause "automatic calibration" to fail. It is recommended to switch to "manual calibration" mode.

6. What is Matter, and why is it important?

Matter is a new smart home connectivity standard that enables devices from different brands and ecosystems (like Apple HomeKit, Google Home, Amazon Alexa, SmartThings, etc.) to work together seamlessly. Orb-RBS supports Matter, allowing easy integration and cross-platform control.

7. Does Orb-RBS require a neutral wire?

Yes. Orb-RBS requires a neutral wire for proper installation and operation.

8. Which apps or ecosystems is Orb-RBS compatible with?

With Matter support, it works with:

Apple Home
Google Home
Amazon Alexa
Home Assistant
Samsung SmartThings

Troubleshooting

Why does the app show the device as offline after clicking "Enable Pairing Mode"?

After enabling Pairing Mode in the eWeLink app, the device enters Network Pairing Mode (indicated by a "two short, one long" LED pattern) and shows as "Offline." Short-press the device button to restore "Online" status.

Device not showing up during Matter pairing.

Make sure the device is in pairing mode.
Make sure your mobile device and Orb-RBS are on the same 2.4GHz Wi-Fi.
Update the app and OS of your phone and smart home hub.

Device is offline or not responding in the app.

Check if the Wi-Fi network is working normally.
Reboot your router and the Orb-RBS.
If needed, reset the device and re-pair it.

Can't control Orb-RBS from the voice assistant.

Make sure the device appears and is controllable in your Matter hub app.
Re-link the service in your assistant app.
Check if the Internet is working properly.

Application Explore

SONOFF designs a series of 3D printing file for sensor accessories, allowing users to 3D print according to their own needs to meet diverse scenario requirements.