Introduction

The SONOFF Wall Switch Enclosure is custom-designed for the accompanying SONOFF Retrofit Module, serving as a physical switch for the retrofit module. Its mini rear structure not only allows perfect compatibility with 86-type junction boxes and 60mm diameter European standard round junction boxes, but also adapts to most shallow junction boxes on the market, easily solving the space limitations often encountered with traditional retrofit module installations.

 

SONOFF Smart 1-Gang Wall Switch Enclosure(Neutral-Required)

① Product Photo

② Product Model: E1GS

③ Compatible SONOFF Retrofit Module: ZBMINIR2/MINIR4M/MINIR4

 

SONOFF Smart 1-Gang Wall Switch Enclosure(No Neutral-Required)

① Product Photo

② Product Model: E1GSL

③ Compatible SONOFF Retrofit Module: ZBMINIL2

 

 

SONOFF Smart Roller Shutter Wall Switch Enclosure

① Product Photo

② Product Model: ERBS

③ Compatible SONOFF Retrofit Module: MINI-RBS/MINI-ZBRBS

 

Highlights

● Made of PC Material:

Fireproof, scratch-resistant, and durable without deformation over time.

● Clip-on Installation Design:

The innovative clip-on design greatly simplifies the wiring process. It is firmly fixed in place, reducing installation time, minimizing errors, and enhancing the overall user experience.

● Ultra-Slim Design:

The maximum thickness is less than 23mm and is fully compatible with 86-Type junction boxes and standard EU round-junction boxes.

● Micro-arc Button Design:

Better aligned with the user's pressing angle, providing precise and effortless tactile feedback.

 

Specification

1-Gang Wall Switch Enclosure（Neutral-Required）
Model	E1GS
Net weight	56.5g
Dimension	86 x 86 x 34 mm
Color	White
Casing material	PC
1-Gang Wall Switch Enclosure（No Neutral-Required）
Model	E1GSL
Net weight	57.5g
Dimension	86 x 86 x 35.8 mm
Color	White
Casing material	PC
Roller Shutter Wall Switch Enclosure
Model	ERBS
Net weight	59.6g
Dimension	86 x 86 x 34 mm
Color	White
Casing material	PC

 

Usage Method

Power Off

Device Assembly

① Use a screwdriver to loosen the screws at the device's wiring terminal and follow the instructions in the image above to install the device onto the back bracket of the Wall Switch Enclosure.

② Wiring Instruction

E1GS & MINIR4M / ZBMINIR2
E1GSL & ZBMINIL2
ERBS & MINI-RBS / MINI-ZBRBS

③ Make sure the wiring is correct, then tighten the screws on the device's terminal block.

 

Install the device into the mounting box

Application Explore