Product Overview

Introduction

Product Name	SONOFF iPlug Zigbee Smart Plug
Product Model	S60ZBTPF

The S60ZBTPF is a 16A single-channel smart plug with Zigbee protocol, featuring energy monitoring, overload protection, and compatibility with plug types C, E & F. It allows users to monitor household power consumption via the app and automate home devices. Equipped with Zigbee repeater functionality, it enhances communication quality within the Zigbee network effortlessly.

Applicable Types of Load Sockets	Applicable Types of Load Sockets

Highlights

• Remote Control

Turn your devices on or off from anywhere using the Smart App. Whether you're at work, on vacation, or just relaxing on the couch, stay in control with a simple tap.

• Timer & Schedule

Set up custom schedules and countdown timers to automate your appliances based on your lifestyle.

• Energy Overview

Track real-time and historical energy consumption directly from the eWelink App. Get detailed

insights into your power usage, optimize device efficiency, and reduce electricity costs effortlessly.

• Overload Protection

Protect your appliances and home by setting overload protection. The S60ZBTPF automatically cuts off power when excessive current is detected, preventing damage and ensuring safe operation at all times.

• Zigbee Repeater Device

The S60ZBTPF Smart Plug isn't just a plug—it also acts as a Zigbee repeater, strengthening your Zigbee mesh network by enhancing signal coverage and improving device communication. Enjoy reliable connectivity across your smart home.

Applications

• Rice Cooker/Electric Kettle: Remote control and scheduling—cook meals or boil water before leaving work, enjoy hot food/drinks as soon as you get home.
• Monitor/Desk Lamp: Automatic shut-off after work hours to reduce standby power consumption.
• Charger: Smart timers for phone/tablet chargers to prevent overcharging and extend battery life.
• etc...

⚠️ Not recommended equipment: High-power inductive loads driven by motors (like air conditioners, refrigerators, or washing machines): These devices often draw a high inrush current at startup, which can exceed the plug's rated current and potentially cause damage. EV charging: EV charging typically demands higher power, often exceeding the plug's rated current capacity. It is strongly recommended to connect only resistive loads that comply with the rated parameters, as inductive loads may lead to uncontrollable risks.

 

Specification

Model	S60ZBTPF
MCU	TLSR8656
Input	250V~50/60Hz MAX 16A μ
Max Load （Resistive Loads）	Voltage: 250V； Current: 16A; Power: 4000W
Standby Power Consumption	<1W
Wireless connectivity	Zigbee3.0
Net weight	79g
Dimension	50x50x61.5mm
Color	White
Casing material	PC V0
Applicable place	Indoor
Working temperature	-10℃~40℃
Working humidity	5%~95% RH, No condensation
Certification	CE/RoHS

eWeLink Key Features

Notice: This functionality refers to the capabilities available after pairing the device with the eWeLink App. For devices paired with other platforms via "Third-party Integration," refer to the [Gateway Function Support Details Table] section. S60TPF is a Zigbee-compatible device and requires a Zigbee gateway to function. It's supported gateway models and their respective feature variations are documented in the [ Compatible Zigbee Hubs List] Section.

Device Home Page Functions​
Key Features	Feature Description
Open/Close Device	Control the on/off of the load.
​Energy Monitoring	Tracks yesterday/today/current month power usage. Real-time current/voltage/power monitoring. Supports viewing & exporting 6-month historical consumption records.
Smart Timer	Scheduled On/Off. Countdown Timer. Recurring on-off loops.

Device Settings
Key Features		Feature Description
Assign location		Set up the home and room where the device is located.
Share Device		The device can be shared with other eweLink accounts.
Third-party Platforms (Add the device to the eWeLink app via the SONOFF gateway, then sync it to the corresponding third-party platform through account linking.) ​ ​ ​ ​	Alexa	voice control(open/close)
	Google Home	voice control(open/close)
	IFTTT	voice control(open/close)
	SmartThings	voice control(open/close)
	Alice	voice control(open/close)
Overload Protection		When the Load Parameters exceed the set threshold, power is cut off to the device, and remote power restoration is supported.
Push Notifications		Push the device's on/off status and power consumption to the user.
Smart Scene		Trigger condition: open / close /power value/daily power consumption / monthly power consumption . Execution action: open/close/reverse.
LAN Control		A control method where the app communicates directly with the device over the same router, without going through the cloud platform. On/Off
Offline Alert		Turn on the "Offline Notifications" feature, and grant eWeLink notification permissions in Phone Settings > Permissions. You will receive a mobile push notification 5 minutes after the device goes offline. On/Off
Historical Logs		Records of device status changes. (You can view the operation records of the past three months).
Power-on State		The device automatically turns off/turns on after being on for a specified duration.
Inching Settings		The device automatically turns off/turns on after being on for a specified duration.

Compatible Zigbee Hubs List

​	eWeLink		Amazon	SmartThings	Home Assistant
​	ZBBridge	ZBBridge Pro ZBBridge Ultra NSPanel Pro​ iHost	echo show 2nd echo 4th gen echo plus 2nd	SmartThings Hub V3 Aeotec SmartThings Home Hub V3	ZBDongle-E/P (Z2M Platform)	ZBDongle-E/P (ZHA Platform)
On/Off	√	√	√	√	√	√
Energy Monitoring	×	√	×	×	×	×
Over-load Protection	×	√	×	×	√	√
Inching Settings	×	√	×	×	√	×
Power-on State	×	√	×	×	√	√
OTA	×	√	×	×	√	√

Notice: Philips gateways and German Zigbee router gateways are not supported. If the device cannot be successfully added to the Zigbee gateway, please update the gateway to the latest version.

Installation and Configuration Guide

① Button

Button	Description
Press & hold 5 seconds	Access to pairing mode
Press once	Turn on/off

Notice: The device enters pairing mode by default when powered on for the first time, with the indicator light flashing slowly. The pairing status lasts for 180 seconds. To enter pairing mode again, please press and hold the device button for 5 seconds.

②Network indicator (Blue)

Network indicator (Blue)	Description
Keeps on	Normal connection with the gateway.
Slow flash	The device is in pairing mode.
Fast flash	Abnormal connection with the gateway.
Quick flashing continuously	The device is in an overload protection lock state.

③ Power LED indicator (Red)

Power LED indicator (Red)	Description
Light on	The device is on.
Light off	The device is off.

 

Add Device

Download App

Please download the "eWeLink" App from Google Play Store or Apple App Store.

​

eWeLink App Pairing

 

FAQ

1. Are smart plugs compatible with all electrical appliances?
   Smart plugs work with most appliances that have a mechanical on/off switch, such as lights, fans, coffee makers, and heaters.
2. Do smart plugs increase power consumption?
   Smart plugs consume an extremely small amount of standby power (usually below 1W).
3. If the device is disconnected from the Zigbee gateway, does the timer function still work? What if the connected Zigbee gateway loses internet access?

If the device disconnects from the Zigbee gateway, the timer will NOT take effect. However, if the Zigbee gateway itself loses internet connection, the timer will still function.

5. Does the device need to be in the same room as Amazon Echo/Google Assistant?

No. The device is bound to the voice assistant through cloud-to-cloud integration. As long as the two accounts are paired and the devices are online, they can be controlled by the voice assistants anywhere.

6. Can I plug a power strip into the smart plug?

It is not suggested to connect a power strip to a smart plug. In general, a plug has a smaller maximum load capacity than a power strip. Furthermore, overload devices (for the smart plug) can be easily attached to the power strip without awareness, increasing the risk of product damage.

Troubleshooting

1. Why does the device shut off automatically even though I didn't enable "Overload Protection"?

The smart socket's maximum current and power thresholds are always active for safety. If the load exceeds these limits, the device automatically cuts off power to prevent overheating or fire hazards.

2. After using the S60ZB to turn off the TV directly connected to it, why can't I use the remote control to turn the TV back on?
   Most TVs enter standby mode when turned off with the remote. However, the smart plug (S60ZB) cuts off all power to the TV when it turns it off. Therefore, after powering off with the plug, you should first turn the S60ZB back on before using the TV remote to switch it on.