|
Settings of the screen brightness and sleep time. |
After adding the temperature controller function to the App, you can set the added temperature controller on the device. |
After adding widgets to the App, you can control the added widgets on the device. |
|
Settings of the screen brightness and sleep time. |
After adding the temperature controller function to the App, you can set the added temperature controller on the device. |
Product Overview
Introduction
|
Product Name |
SONOFF NSPanel Smart Scene Wall Switch |
|
Product Model |
NSPanel is a control panel with an HMI screen and two-way switches, offering both app-based and device-based control interfaces. It features a temperature sensor, two relays, and a TFT screen. As a wall switch, it controls two output loads. It also manages devices like heating and cooling connected to your eWeLink account to maintain a constant temperature in the surrounding environment. Additionally, it serves as a control panel, displaying other devices, groups, and scenes on the device interface for direct control.
Highlights
① Real-time Weather and Indoor Temperature Display
It provides real-time outdoor weather updates and accurate time display, with a built-in temperature sensor to help you monitor changes in indoor ambient temperature.
②Dual-Control Methods
The physical switch directly controls local loads (such as lighting/devices), while the touchscreen provides smart control, allowing synchronization and management of smart devices under the same account. Frequently used devices, groups, and manual scenes are displayed on the screen, enabling control without the need to open the app.
③Temperature Control
The built-in temperature sensor allows the NSPanel to connect with other heating and cooling devices, managing indoor temperature through both manual and automatic modes, creating a comfortable environment.
④Timer & Schedule
Set up custom schedules and countdown timers to automate your appliances based on your lifestyle.
⑤ Smart Scene
- Instant Setup: Activate complex routines with a single tap.
- Whole-Home Synchronization: Cross-device automation within the Sonoff ecosystem – build your personalized smart scenarios.
Applications
- Light Control
When returning home, turn on the lights with a physical button, and before bed, turn off the lights directly through the app.
- Heating System AC Solenoid Valve Control
NSPanel can achieve intelligent heating management by directly connecting to an AC solenoid valve. When the built-in sensor detects that the room temperature exceeds the preset upper limit, the system will automatically close the solenoid valve to cut off the underfloor heating water supply. Once the temperature drops to the preset lower limit, the valve will reopen to allow the hot water to circulate, thereby precisely maintaining the indoor temperature in a stable state.
- Smart Scene with Dry Device
Connect the dry contact device 4CHRPOR3 directly to the boiler and set up a smart scene to enable the NSPanel to automatically interact with the 4CHRPOR3. When NSPanel detects that the ambient temperature falls below the set value, it will turn on 4CHRPOR3, which in turn activates the boiler to raise the room temperature. Conversely, when the temperature rises above the set value, the boiler will be turned off to lower the room temperature.
Specification
|
Model |
|
|
MCU |
ESP32 |
|
Input |
100-240V AC 50/60Hz |
|
Output |
100-240V AC |
|
Max.Load |
480W/Gang, 2A/Gang; |
|
Wireless connectivity |
IEEE 802.11b/g/n 2.4GHz |
|
Net weight |
NSPanel-EU: 230g |
|
Dimension |
NSPanel-EU：86*86*41.7mm NSPanel-US：120*74*41.7mm |
|
Color |
White |
|
Screen Type |
TFT screen |
|
Screen Size |
3.5-inch |
|
Screen Resolution |
480x320px |
|
Casing material |
PC V0 |
|
Applicable place |
Indoor |
|
Working temperature |
10T40 (-10℃~40℃) |
|
Working humidity |
5%~95% RH, non-condensing |
|
Certification |
NSPanel-EU: CE/UKCA/3C/SRRC/RoHS NSPanel-US: CE/FCC/UKCA/RoHS |
Key Features
eWeLink Platform
|
Device Home Page Functions |
|
|
Key Features |
Feature Description |
|
Open/Close Device |
Control the on/off of the load. |
|
Temperature Control |
NSPanel is equipped with a built-in temperature sensor that can monitor the surrounding environment's temperature in real time and automatically control heating or cooling devices as needed. It can directly connect to devices with heating or cooling functions or work through intelligent scene linkage, allowing NSPanel to intelligently determine when to activate the relevant devices. Users can easily adjust the temperature threshold through the panel or choose the automatic mode to achieve precise environmental temperature control, ensuring a comfortable indoor temperature. |
|
Smart Timer |
|
|
Device Settings |
||
|
Key Features |
Feature Description |
|
|
Assign Location |
Set up the home and room where the device is located. |
|
|
Share Device |
The device can be shared with other eweLink accounts. |
|
|
Smart Scene |
|
|
|
Third-party Platforms (Add the device to the eWeLink app via the SONOFF gateway, then sync it to the corresponding third-party platform through account linking.) |
Alexa |
voice control(Open/Close) |
|
Google Home |
voice control(Open/Close) |
|
|
SmartThings |
voice control(Open/Close) |
|
|
IFTTT |
voice control(open/close) |
|
|
Alice |
voice control(Open/Close) |
|
|
天猫精灵（VIP Benefits） |
voice control(Open/Close) |
|
|
小爱同学 |
voice control(Open/Close) |
|
|
小度 |
voice control(Open/Close) |
|
|
Group Control |
Create a group consisting of one or multiple devices of the same type to enable synchronous control for all devices within the group. |
|
|
LAN Control |
A control method where the app communicates directly with the device over the same router, without going through the cloud platform.
|
|
|
eWelink-Remote Control |
If you have also purchased the SONOFF R5, you can add it as a "sub-device" to the S40TPB. By using the "Scene Function" in the eWeLink app, the two devices can be linked, allowing the Sonoff R5 to function as a convenient wireless remote controller. |
|
|
Offline Alert |
When this feature is enabled, the device will notify the user if it remains offline for more than 5 minutes. |
|
|
Push Notifications |
Push the device's on/off status and power consumption to the user. |
|
|
Logs |
Records of device status changes. (You can view the operation records of the past three months). |
|
|
Power-on State |
The switch state of the device when power is restored after a power outage.
|
|
|
Inching Setting |
The device automatically turns off/turns on after being on for a specified duration. |
|
|
Interlock |
When enabled, you can only turn on one channel at a time. When one channel is turned on, the other channels will be off. |
|
|
Temperature uint |
Switch the temperature unit(°C & °F). |
|
|
Temperature Calibration |
You can adjust the temperature detected by the NSPanel device as needed, with a step value of 1. |
|
|
Temp. & Humi. Display |
Select the temperature and humidity source to be displayed on the NSPanel screen:
|
|
|
Widgets |
Add devices under the same account to be displayed on the NSPanel screen. |
|
|
Screen Settings |
|
|
Screen Side
|
Device Home Page Functions |
|
|
Key Features |
Feature Description |
|
Screen Settings |
|
|
Screen Display |
|
|
Temperature controller interface |
The NSPanel will display the type of linked device: Heating or Cooling. |
|
Widgets Interface |
Select the devices to be added to the NSPanel screen from the "Widgets" section in the app. Once selected, you can access the control page of the device directly from the screen. |
Installation and Configuration Guide
① Screen
② Pairing button/Physical switch
|
Pairing button/Physical switch |
Description |
|
Pairing button/Physical switch |
Turn on/off the external load. |
③ Reset Button
|
Reset Button |
Description |
|
Reset Button |
Use a needle to poke the small round hole at the bottom of the device, and it will restart directly. |
④Temperature Sensor
Installation
Power off
| Warning: Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on! |
Wiring instruction
|
Note:
|
|
Wiring Symbols |
|||
|
Terminals |
|
Wires |
|
|
N（Optional） |
Neutral Line |
N |
Neutral Line |
|
L |
Live Line |
L |
Live Line（100~240V） |
|
L out |
Live Output Terminal(100~240V) |
|
|
Log in to eWeLink Account
Download App
Please download the "eWeLink" App from Google Play Store or Apple App Store.
Power on
After powering on, the device will enter the Bluetooth pairing mode during the first use.The screen status is shown in the above image.
|
Notice:
|
Add Device
Tap "+" and select" Bluetooth pairing", then operate following the prompt on the App.
Log in
Tap "Log in" on the device and tap "+" on the eWeLink App to select "Scan", then scan the QR code on the device screen with your App.
Operation Guide
Restart Device
There is a forced restart button on the device. Use a needle to poke the small round hole at the bottom of the device, and it will restart directly.
FAQ
- What devices are supported by NSPanel?
NSPanel_Supported_Devices_List.pdf
- Can temperature be used as a trigger to control other devices?
Yes, while the "Temperature Control" feature on NSPanel allows only one device to be displayed and controlled on the screen, temperature can still be used as a trigger condition in smart scenes to control additional devices under the same account. Moreover, the on/off status of NSPanel's two channels can also serve as trigger conditions and actions within scenes. - Can NSPanel be used after losing network connection?
After losing network connection, features such as the thermostat and screen components that rely on the server will be unavailable. However, basic functions like switching the device on/off, Power-on State, and inching setting can still be controlled via the local area network (LAN). As long as the device is powered on, it can still function as a regular wall switch, even when it is not connected to the network or router. - How many time periods can be set for the automatic mode in the "Temperature Control" feature?
Up to 6 periods. - Can the NSPanel screen be set to turn off at a scheduled time?
Yes, to reduce light pollution and lower energy consumption, you can set a scheduled time for the NSPanel screen to turn off.
Troubleshooting
- Fail to pair Wi-Fi devices to the eWeLink APP.
- Make sure the device is in pairing mode.
- After three minutes of unsuccessful pairing, the device will automatically exit pairing mode.
- Please turn on location services and allow location permission.
- Before choosing the Wi-Fi network, location services should be turned on and location permission should be allowed. Location information permission is used to obtain Wi-Fi list information. If you click Disable, you will not be able to add devices.
- Make sure your Wi-Fi network runs on the 2.4GHz band.
- Make sure you entered a correct Wi-Fi SSID and password, no special characters contained.
- The wrong password is a very common reason for pairing failure.
- The device shall get close to the router for a good transmission signal condition while pairing.
- Please try to pair it in compatible mode.