Introduction
Apple Home offers a sleek, intuitive smart home experience—and now with Matter protocol support, adding devices like the SONOFF MINIR4M Wi-Fi Smart Switch is easier than ever. SONOFF's Matter over Wi-Fi devices integrate locally with Apple Home, without relying on cloud servers or additional hubs.
In this guide, we'll walk you through how to pair the SONOFF MINIR4M with Apple Home, enabling remote control, Siri voice commands, and automation through your Apple Home app.
Preparation
Before you begin, make sure you meet the following requirements:
- Matter-certified device with a QR code or setup code (e.g., SONOFF MINIR4M)
- A stable 2.4GHz Wi-Fi network
- An iPhone or iPad running iOS 16.3 or later
- An Apple Home hub has been added to your Apple Home app, such as: HomePod / HomePod mini, Apple TV (Check more compatible hubs here)
Setup Guide
Step 1: Power on Your SONOFF Matter Device
- Install and wire the MINIR4M following the included user manual.
- Power it on — the device enters the pairing mode by default when powered on for the first time, and the LED indicator flashes two short and one long. If not, press and hold the button for 5–10 seconds to reset and enter pairing mode.
Step 2: Add the Device in the Apple Home App
- Open the Home app on your iPhone or iPad
- Tap the "+" → "Add or Scan Accessory"
- Scan the Matter QR code on the device or the Quick Guide
- Wait for the device to be connected and follow the on-screen prompts:
- Assign the device to a room
- Rename the switch if needed
- Choose the button action (e.g., Light or Outlet configuration)
Once added, the SONOFF MINIR4M will appear in your Home app. You can tap to control manually or include it in an automation (e.g., "When I arrive home, turn on the light"), or try using Siri, e.g., "Hey Siri, turn off the living room lights".
SONOFF Matter Devices List
All SONOFF Matter devices listed below are compatible with Apple Home:
|
Category |
Product Name |
|
DIY Smart Switch |
Smart Roller Shutter Switch | MINI-RBS |
|
Wi-Fi Smart Switch (Dry Contact Relay) | MINI-D |
|
|
MINI Extreme Wi-Fi Smart Switch | MINIR4M |
|
|
Smart Wall Switch |
SwitchMan Smart Wall Switch | M5 Matter |
Stay tuned for more SONOFF Matter-compatible devices.
Troubleshooting
Can't scan QR code?
Find the QR code in the product Quick Guide.
Use the numeric setup code (you can find it in the eWeLink App - Device Settings).
Ensure your iPhone is running iOS 16.3 or later.
Device not showing up in Home app?
Confirm the device is in pairing mode (LED blinking)
Make sure your device is connected to 2.4GHz Wi-Fi
Restart the device and Home app, then try again.
Apple Home says "Accessory Not Certified"?
Make sure the device is officially labeled "Matter" and the firmware is up to date.
FAQ
Q: Can I use SONOFF Matter devices with Apple Home without a HomePod or Apple TV?
A: No. To control Matter devices and enable automations in Apple Home, you need a Matter controller such as HomePod (mini or newer) or Apple TV 4K (2nd gen or newer).
Q: Is SONOFF MINIR4M compatible with iOS Shortcuts and Scenes?
A: Yes. Once added to Apple Home, you can use MINIR4M in any Shortcut, Scene, or automation routine.
Q: Can I use the MINIR4M with other platforms too?
A: Yes, if you enable multi-admin sharing, you can add the same device to platforms like Google Home, Home Assistant, or other Matter ecosystems.
Q: Can I control the device remotely outside my home?
A: Yes, but only if you have a Home Hub (HomePod or Apple TV) configured in your Apple Home. Without a hub, remote access is not available.